1000E-030-P1 Pneumatic Cistern
6.4k
0
- / 5Rate this product
Available for:
The 1000E-030-P1 Pneumatic Cistern is fitted with Fluidmaster Dual flush valve – Pneumatic operation
⦁ Fitted with Fluidmaster side entry Airgap™ Fill valve – Heavy duty brass inlet shank
⦁ Can be used to achieve a recognised air gap arrangement.
⦁ Meets requirements of the Water Supply (Water Fittings) Regulations, Byelaws in Scotland, as they apply to
Type AG and Type AUK1 air gaps in WC suites and the interim agreement.
⦁ Brass inlet thread ½” BSP
⦁ Top and Front Access
⦁ Internal Overflow
⦁ Flush pipe, seals, nuts, washers included
⦁ Flush pipe designed to be cut very low - Horizontal centerline as low as 50mm to underside of the cistern.
⦁ Outlet thread size 2”
⦁ Efficient flushing of nominally 6 & 4 Litres at 198mm waterline
⦁ Reduced flush option available for 4.5 and 3L (175mm W/L) if required - Provides additional BREEAM points
⦁ *Dimensions (mm)
- Cistern 337L x 135W x 315H
- Flush Bend - 330 to 50mm - Measured from centre line of horizontal to underside of the cistern base.
⦁ Fixing Bracket Supplied for easy installation
⦁ Made From Recyclable Materials
You must log in to write a comment
Login or Join
Bimstore on 23 November 2024
Be the first to write a comment...