Kerto-Ripa Semi Closed Panel

Object metadata

• _BIMspec_GUID0
• _created byKris Atkinson
• _current revision1
• _distributed bywww.bimstore.co.uk
• Accessibility Performancen/a
• Asset TypeFixed
• Bottom Plate MaterialKerto-S
• Bottom Plate Thickness T250 mm
• Bottom Plate Width B31150 mm
• Bottom Plate Width B32300 mm
• Bottom Plate Width B32/2150 mm
• CertificationEuropean Technical Approval ETA-07/0029
• Classification NameUniclass 2015
• Classification ValuePr_25_71_42_70
• Code Performancen/a
• Colorn/a
• Constituentsn/a
• Created ByMetsä Wood
• Created OnAmmended October 2015
• DescriptionThe Kerto-Ripa® panel is a structural engineered timber building element made from glued Kerto® members. It is used to create the ground, intermediate floors and roofs of residential, commercial and public buildings. Kerto-Ripa can be used in both thermo-insulated structures and non-insulated structures.
• Distance from 1st to 2nd Rib532 mm
• Distance from edge to first Rib0 mm
• Distance from edge to last Rib0 mm
• Documentation Certificatesn/a
• Documentation Installation Guiden/a
• Documentation Literaturewww.metsawood.com/uk/applications/building-and-construction/flooring-solutions/kerto-ripa/pages/default.aspx
• Documentation Technicaln/a
• DurabilityKerto-RIPA can be used in service classes 1 and 2 as defined in Eurocode 5, which correspond to the use classes 1 and 2 as defined in EN 335-1. The product shall not be used in service class 3 / use class 3 (3.1 exterior, above ground, protected, occasionally wet) without additional protective treatment.
• Duration UnitYears
• Element_width1800 mm
• Energy Economy and Heat RetentionThe thermal conductivity for both web and flange materials is 0.13 W/(m K) according to EN 1254.
• Expected Life1
• Extidentifiern/a
• Featuresn/a
• Finishn/a
• First Rib location calculation875 mm
• Formaldehyde ClassThe formaldehyde release of the LVL is classified to be E1 in accordance with EN 14374. Kerto LVL products have formaldehyde releases less than 0,030 ppm which is 30% of E1 class requirment 0,10 ppm when determined in accordance with EN717-1.
• Graden/a
• KeynoteG20
• Last Rib location calculation875 mm
• ManufacturerMetsä Wood
• Materialn/a
• ModelKerto-RIPA SC 'Semi Closed Panel'
• Model NumberKerto-RIPA SC 'Semi Closed Panel'
• NBS Noten/a
• NBS Object NameRaised access floor panels
• NBS Reference45-45-00/320
• NBS Type IDn/a
• NoNo
• Number of Ribs3
• Number of Ribs 3Yes
• Number of Ribs 4No
• Number of Ribs 5No
• Product Documentation Linkwww.mwebrochure.eu/uk/metsawood/kertoripa/
• Product Page URLwww.metsawood.co.uk/buildingconstruction/floors/Pages/KertoRipa.aspx
• Production Yearn/a
• Reaction to FireUntreated KertoLVL is classified to have reaction to fire class D-s1, d0. If thermal insulation is used inside the elements, it shall be classified to have reaction to fire class A1 as a default.
• Referenced Standardn/a
• Replacement Cost0
• Resistance to FireA floor or roof construction made of Kerto RIPA elements may have resistance to fire class REI 30 or REI 60 provided that specific conditions are fulfilled. The load bearing capacity and the deflection of the Kerto RIPA element construction in case of fire is calculated in accordance with EN 1995-1-2 taking into account the charring rates and limitations provided.
• Rib 2No
• Rib 3Yes
• Rib 4No
• Shapen/a
• Size1800x25 | 3(1)x51x260 | 150/300x50
• Spare Partsn/a
• Standard Panel Depth150mm to 1200mm
• Standard Panel Length1000mm to 25000mm. For panels from 12000mm in length transportation requirements should be considered.
• Standard Panel Widthfrom 900 to 2500mm. Standard Widths are 1800, 2400 & 2500mm
• Structural PerformanceStructural performance of the Kerto-RIPA elements is considered in accordance with the limit state design principles specified in Eurocodes. These methods follow EN 1995-1-1.
• Suitable ApplicationKerto-RIPA elements are used as floor and roof construction. For roof construction a single ply membrane can be applied in the factory that is then lapped on site during the Kerto-RIPA installation.
• Suitable FinishesKerto-RIPA elements can be painted or stained. The suitability of the treatment shall be checked with the manufacturer of it.
• Tag Numbern/a
• Top Plate MaterialKerto-Q
• Top Plate Thickness T125 mm
• Type CommentsH335-1800x25-3(1)x51x260-150/300x50
• Type NameH335-1800x25-3(1)x51x260-150/300x50
• URLwww.metsawood.co.uk/Pages/Default.aspx
• Warranty Descriptionn/a
• Warranty Duration Laborn/a
• Warranty Duration Partsn/a
• Warranty Duration UnitYears
• Warranty Guarantor Laborn/a
• Warranty Guarantor Partsn/a
• Water vapour permeability and moisture resistanceKerto-RIPA elements may contain thermal insulation in cavities. The construction resembles a timber frame construction whare any moisture possibly coming into the cavities is ventilated or will be removed by diffusion. In cases where resistance to fire is required, ventilation cavities may require fire stops according to separate design.
• Web Beams Height H1260 mm
• Web Beams MaterialKerto-S
• Web Beams Width B151 mm
• Web Beams Width B251 mm
• Web Beams Width B351 mm
• Web Beams Width B451 mm
• YesYes