bimstore - NABIC - Fig 500L - Pressure Relief Valve

3.1k
0
- / 5
Rate this product

BS1192:4

Compliant

BSB

Compliant

Object Data

1 Revision

Last Updated

02/10/2020

Download BIM

Add to collection

Available for:

The NABIC Fig500L is designed primarily for use where high tightness is required on the discharge side, having a sealed spring cover to prevent the possibility of back pressure leakage through the top of the valve.

The lift is progressively proportional to flow. All wetted parts are manufactured from dezincification resistance materials. Designed and tested to BS EN ISO 4126 -1.

High discharge capacity
Pressure tight on discharge side
Suitable for liquids and inert gases

_AuthorIH
_Authorized Bybimstore
_Bim Spec Guid0
_BS Bible Version16
_Created Bywww.bimstore.co
_Current Revision1
_Distributed Bywww.bimstore.co
_Object User Guidewww.bimstore.co/products/fig-500l-pressure-relief-valve/document/object-user-guide
Accessibility Performancen/a
Assembly CodeD2040100
Asset TypeFixed
BIM Object NameNABIC_PipeAccessories_Valves_PressureRelief_Fig500L
Body Height123 mm
Classification NameUniclass2015
Classification ValuePr_65_54_95_65
Code Performancen/a
ColorGold
Connection Size15 mm
Constituentsn/a
Created Bynabicsales@cranebsu.com
Created On2020-08-05T09:00:00
D128 mm
D237 mm
D327 mm
D442 mm
D529 mm
DescriptionThe NABIC 500 is designed primarily for use on unvented hot water heating systems, where a high capacity, emergency steam relief capability is required. All wetted parts are manufactured from dezincification resistance materials. Designed and tested to BS EN ISO 4126 -1. WRAS approved (1 bar and above).
Documentation Certificateswww.bimstore.co/products/fig-500l-pressure-relief-valve/document/product-certificates
Documentation Installation Guidewww.bimstore.co/products/fig-500l-pressure-relief-valve/document/installation-guide
Documentation Literaturewww.bimstore.co/products/fig-500l-pressure-relief-valve/document/product-literature
Documentation Maintenancewww.bimstore.co/products/fig-500l-pressure-relief-valve/document/maintenance-information
Documentation Technicalwww.bimstore.co/products/fig-500l-pressure-relief-valve/document/technical-data-sheet
Duration UnitYears
End ConnectionsThreaded female inlet and outlet connections. Outlet connection is one size larger than inlet connection. Threaded connections are Rp (BSP) parallel to BS EN 10226-1. NPT connections are available upon request.
Expected Life0
External Diameter 119 mm
External Diameter 224 mm
Featuresn/a
Finishn/a
Fitting MaterialBrass
Graden/a
H116 mm
H234 mm
H340 mm
H42 mm
Hex Height9 mm
Hex Offset0 mm
Ifc Export AsIfcValve
Ifc Export TypeIfcValveTypeEnum.CHECK
KeynoteS
ManufacturerNABIC
Manufacturer NameNABIC
MaterialBronze
MediumHot water, steam, compressed air and inert gasses, CO2 (to 20 Degree C), ethylene glycol, potable water.
ModelPressure Relief Valve - Fig 500L
Model NumberN-500L-015
Model ReferencePressure Relief Valve - Fig 500L
N14 mm
N23 mm
NBS DescriptionPressure relief valves
NBS Object NameNABIC - Pressure relief valves
NBS Office Master Tagn/a
NBS Reference90-10-90/415
Nominal Depth42 mm
Nominal Diameter15 mm
Nominal Height123 mm
Nominal Length54 mm
Pressure Rating1.0 to 12.5
Production Year2020
Product Page URLwww.nabicvalves.com/product/pressure-relief-valves/fig-500l-pressure-relief-valve
Product TestingAll valves are shell and seat tested (to confirm set pressure) before leaving the factory and all valves are supplied pre-set with a tamper proof seal. Pressure Test Certificate and Letters of Conformity available on request.
Referenced Standardn/a
Replacement Costn/a
Shapen/a
Size1/2" x 3/4"
Socket Depth 115 mm
Socket Depth 215 mm
Socket Dia33 mm
Socket Height20 mm
Socket Length33 mm
Spare Partsn/a
Temperature Rating20 Degree C to 195 Degree C
Type CommentsN-500L-015
Type NameN-500L-015
URLwww.nabicvalves.com/
Warranty Descriptionn/a
Warranty Duration Labor0
Warranty Duration Parts5
Warranty Duration UnitYears
Warranty Guarantor Labornabicsales@cranebsu.com
Warranty Guarantor Partsnabicsales@cranebsu.com