Juniper SS

Object metadata

• _AuthorIan Holmes
• _Bim Spec Guid0
• _BS Bible Version16
• _Created Bywww.bimstore.co
• _Current Revision1
• _Distributed Bywww.bimstore.co
• _Object User Guidewww.bimstore.co
• 6 Monthlyn/a
• Access Clearance Bottom0 mm
• Access Clearance Front0 mm
• Access Clearance Left0 mm
• Access Clearance Rear0 mm
• Access Clearance Right0 mm
• Access Clearance Top0 mm
• Accessibility Performancen/a
• Air Inlet Connection Size0 mm
• Annuallyn/a
• Assembly CodeD3040400
• Asset TypeFixed
• Bespoke Timeframen/a
• BIM Object NameModutherm_MechanicalEquiptment_Calorifiers_JuniperSS_TwinCoil
• Black MaterialSteel, Grey
• BMS LinksNo
• Calorifier MaterialModutherm_Steel_PaintFinish_Glossy
• Capacity1000.0 L
• CE Approvaln/a
• Classification NameUniclass2015
• Classification ValuePr_60_60_38_85
• Clean Out Cover And Inspection Opening Size120 mm
• Clean Out Cover And Inspection Opening TypeBlind Inspection Flange
• Code Performancen/a
• Cold Water Inlet DN25 mm
• ColorGrey
• ColourGrey
• Condensate Drain Size0 mm
• Condensate Drain Typen/a
• Connection For Immersion Heater DN50 mm
• Constituentsn/a
• Continuous Output At 44 Degree Differentialn/a
• Continuous Output At 50 Degree Differential1865.3
• Control Optionsn/a
• Control Panel MaterialPVC, Unplasticized
• Control Thermostat Rangen/a
• Control Typen/a
• Created Byenquiries@modutherm.co.uk
• Created On2020-03-23T09:00:00
• Dailyn/a
• DescriptionThe Juniper SS hot water calorifier is available as either a single coil or twin coil, and as a DHW storage vessel. The calorifier capacities range from 500-2000 litres, whilst the storage vessel ranges from 500-3000 litres.
• Dimension 1112 mm
• Dimension 101792 mm
• Dimension 112192 mm
• Dimension 122425 mm
• Dimension 13800 mm
• Dimension 141020 mm
• Dimension 151372 mm
• Dimension 15 Angle0.00 °
• Dimension 161792 mm
• Dimension 16 Angle0.00 °
• Dimension 171792 mm
• Dimension 2317 mm
• Dimension 2 Angle0.00 °
• Dimension 3412 mm
• Dimension 3 Angle0.00 °
• Dimension 4477 mm
• Dimension 4 Angle45.00 °
• Dimension 4 Blind Angle0.00 °
• Dimension 51256 mm
• Dimension 5 Angle0.00 °
• Dimension 61282 mm
• Dimension 6 A1792 mm
• Dimension 6 A Angle0.00 °
• Dimension 6 Angle0.00 °
• Dimension 71337 mm
• Dimension 7 Angle45.00 °
• Dimension 81557 mm
• Dimension 8 Angle0.00 °
• Dimension 91467 mm
• Dimension 9 Angle45.00 °
• Documentation Certificateswww.modutherm.co.uk/juniper-ss
• Documentation Installation Guidewww.bimstore.co/products/juniper-ss/document/installation-guide
• Documentation Literaturewww.bimstore.co/products/juniper-ss/document/product-literature
• Documentation Maintenancewww.modutherm.co.uk/juniper-ss
• Documentation Technicalwww.modutherm.co.uk/juniper-ss
• Drain Connection Size20 mm
• Drain Connection Typen/a
• Duration UnitYears
• Embodied Carbonn/a
• Energy Technology Listn/a
• Environmental Product Declarationn/a
• ErP Energy Labeln/a
• Expected Life0
• External MaterialNOFIRE® polyester fleece
• FeaturesThe Juniper SS hot water calorifier is available as either a single coil or twin coil, and as a DHW storage vessel. The calorifier capacities range from 500-2000 litres, whilst the storage vessel ranges from 500-3000 litres.
• Finishn/a
• Flow And Return Connection Size32 mm
• Flow And Return Connection TypeThreaded
• Flue Connection Size0 mm
• Flue Or Air Intake Classificationn/a
• Frequency50.00 Hz
• Fuel Connection Size0 mm
• Fuel Connection Typen/a
• Fuel Typen/a
• Full Load Currentn/a
• Fuse Ratingn/a
• Gas Consumption Raten/a
• Graden/a
• Green Guide For Specificationn/a
• Gross Inputn/a
• Gross Weight1122.00 kg
• Half Width510 mm
• Heater Operationn/a
• Heat Exchanger MaterialStainless Steel
• Heat Generator Efficiencyn/a
• Heat Generator Load Profilen/a
• Heat Generator Thermal Efficiencyn/a
• Heat Up Time35.5 Minutes
• Hot Water Outlet DN32 mm
• Ifc Export AsIfcEnergyConversionDeviceType
• Ifc Export TypeIfcCoilTypeEnum.WATERHEATINGCOIL
• IK Ratingn/a
• Insulation Thickness110 mm
• Insulation TypeNOFIRE® polyester fleece
• InterlocksNo
• IP Ratingn/a
• KeynoteS10/150
• Lid Height60 mm
• Life Cycle Analysisn/a
• Location Of Manufacturern/a
• Magnesium AnodeYes
• Magnesium Anode DN32 mm
• Maintenance Required 0-300hrsn/a
• Maintenance Required 1001-2000hrsn/a
• Maintenance Required 2001-4000hrsn/a
• Maintenance Required 301-600hrsn/a
• Maintenance Required 4001-8000hrsn/a
• Maintenance Required 601-1000hrsn/a
• Maintenance Required 8001-12000hrsn/a
• ManufacturerJuniper SS - Twin Coil
• Manufacturer NameJuniper SS - Twin Coil
• MaterialStainless Steel
• Material Ingredient Reportingn/a
• Maximum Gas Inlet Pressuren/a
• Maximum Oil Inlet Pressuren/a
• Maximum Operating Pressure When Open Vented6
• Maximum Operating Pressure When Unvented6
• Maximum Power Consumptionn/a
• Maximum Water Temperature95
• Minimum Gas Inlet Pressuren/a
• Minimum Oil Inlet Pressuren/a
• Minimum Operating Pressuren/a
• Minimum Power Consumptionn/a
• ModelJuniper SS
• Model NumberTwin Coil - 1000 Litre
• Model ReferenceJuniper SS
• Monthlyn/a
• MountingFloor Standing
• NBS DescriptionStorage calorifiers
• NBS Object NameModutherm - Storage calorifiers
• NBS Office Master Tagn/a
• NBS Referencen/a
• Nominal Depth1020 mm
• Nominal Gas Inlet Pressuren/a
• Nominal Height2192 mm
• Nominal Length1020 mm
• Nominal Oil Inlet Pressuren/a
• NOx Emissionsn/a
• O&M Manualn/a
• Oil Consumption Raten/a
• Overall Length1020 mm
• Overall Height2192 mm
• Overall Width1020 mm
• Production Year2020
• Product Literaturewww.bimstore.co/products/juniper-ss/document/product-literature
• Product Model NumberTwin Coil - 1000 Litre
• Product RangeJuniper SS
• Quaterlyn/a
• Re Circulation DN25 mm
• Recovery Raten/a
• Replacement Costn/a
• Responsible Extraction Of Materialsn/a
• Responsible Sourcing Of Materialsn/a
• Safety Valve Connection Size40 mm
• Safety Valve Connection TypeThreaded
• Secondary Return Connection Size25 mm
• Secondary Return Connection TypeThreaded
• ShapeCylinder
• Shipping Weight1122.00 kg
• Size2192mm(h) x 1020mm(ø)
• Sound Pressure Leveln/a
• Spare Partsn/a
• Standing Lossn/a
• Starting Currentn/a
• Steel Thickness2 mm
• Supply Phasen/a
• Tand P Valve DN40 mm
• Tapping For Instrumentation15 mm
• TypeTwin Coil - 1000 Litre
• Type CommentsTwin Coil - 1000 Litre
• Type NameTwin Coil - 1000 Litre
• URLwww.modutherm.co.uk/
• Voltage230.00 V
• Warranty Description5 year warranty on tank body. 2 year warranty on all other components.
• Warranty Duration Labor2
• Warranty Duration Parts2
• Warranty Duration UnitYears
• Warranty Guarantor Laborenquiries@modutherm.co.uk
• Warranty Guarantor Partsenquiries@modutherm.co.uk
• Warranty IDn/a
• Water Content902
• Water Treatment Requiredn/a
• Weeklyn/a
• WRAS ApprovalYes