Domocompact - My Home 2 - Temperature control and thermal energy metering modules

Object metadata

• _AuthorAM
• _Authorized Bybimstore
• _Bim Spec Guid0
• _BS Bible Version17
• _Created Bywww.bimstore.co/
• _Current Revision1
• _Distributed Bywww.bimstore.co/
• _Object User Guidewww.bimstore.co/products/domocompact-my-home-temperature-control-and-thermal-energy-metering-modules/document/object-user-guide
• Accessibility Performancen/a
• Adjustable Outlet Temperature Of DHW(Only Models With Optional Mixing)32 to 50°C
• Assembly Code23.60.00.00
• Asset TypeFixed
• BIM Object NameWatts_TemperatureControlAndThermalEnegryMeteringModule_Domocompact_MyHome2
• Bottom PlateNo
• Bypass Circuit Kvs2.19
• Classification NameUniclass2015
• Classification ValuePr_75_50_20_88
• Code Performancen/a
• Colorn/a
• Constituentsn/a
• Created Bycontact@wattswater.com
• Created On2024-04-01 T09:00:00
• Default Elevation0 mm
• DescriptionDOMOCOMPACT SERIES thermal modules act as an interface between the boiler and the consumer, performing temperature control and thermal energy metering functions. They are supplied by centralised primary fluid and provide the same independent operation and control as an independent heating system. DOMOCOMPACT Series modules control the flow of fluid to the consumer using an ON/OFF zone actuator electrically connected to a programmable thermostat located in the consumer’s control room. When heat is required, the flow of operating fluid is conveyed to the heating system at a rate set by an appropriate control device and measured by a volumetric flow meter on the return line. The thermal energy metering system (in accordance with MID 2014/32/EU) also comprises two flow/return temperature sensors and an electronic panel, which makes it possible to subsequently allocate costs on the basis of actual consumption. The reading of individual user data/consumption can also be easily concentrated, transmitted and processed remotely. If there is no demand for heat, the fluid is returned to the primary circuit by means of a bypass valve, set in such a way as not to affect the other consumers. DOMOCOMPACT series modules can be used together in different configurations and, in addition to the heating/cooling section, they can accommodate up to a maximum of three additional, independent sections for the supply of domestic hot and cold water and a third branch for dual water. When a tap is turned on, the supply of hot and cold mains and dual water is metered by a volumetric flow meter and recorded on the electronic panel. The head connections of each section are fitted with ball valves so that the unit can be shut off if necessary. The same module can be used in different installation configurations (left/right primary fluid inlet, vertical/horizontal orientation). DOMOCOMPACT Series modules can be fitted into a small space because they are extremely compact. They are factory-assembled and individually tested to ensure that they are water-tight. Thanks to their highly advanced construction technology, the same module can be used in different installation configurations (left/right primary fluid inlet, vertical/horizontal orientation).
• Dimensions(Lx Hx D)390x230x110 (open frame E); 390x480x110 (open frame E1, E2, E3); 550x550x110 (closed frame)
• DN15
• Documentation Certificateswww.bimstore.co/products/domocompact-my-home-temperature-control-and-thermal-energy-metering-modules/document/product-certificates
• Documentation Installation Guidewww.bimstore.co/products/domocompact-my-home-temperature-control-and-thermal-energy-metering-modules/document/installation-guide
• Documentation Literaturewww.bimstore.co/products/domocompact-my-home-temperature-control-and-thermal-energy-metering-modules/document/product-literature
• Documentation Maintenancewww.bimstore.co/products/domocompact-my-home-temperature-control-and-thermal-energy-metering-modules/document/maintenance-information
• Documentation Technicalwww.bimstore.co/products/domocompact-my-home-temperature-control-and-thermal-energy-metering-modules/document/technical-data-sheet
• Duration UnitYear
• E1No
• E2No
• E3No
• Electronic ManagementLocal (LCD) or M-bus (EN1434) or RF (433 Mhz, 10 mW)
• Energy Section And Domestic Water Section Connections1” G
• Expected Life0
• Featuresn/a
• Finishn/a
• Flow Rate Q Max(In Continuous Use)<1500
• FrameNo
• Graden/a
• Heating Circuit Kvs(With Consumer Short-circuited)1.83
• Heating Circuit Maximum Flow Rate1.5 m3/h
• Ifc Export AsIfcValve
• Ifc Export TypeIfcValveTypeEnum.USERDEFINED
• KeynoteS
• ManufacturerWatts
• Manufacturer NameWatts
• Materialn/a
• Maximum Operating Pressure(Static)800 kPa
• Maximum Temperature Of Incoming Hot Fluid90°C
• MeteringHeating, Cooling
• ModelDCH2-DA E
• Model NumberDCH2-DA E
• Model ReferenceTemperature control and thermal energy metering modules
• NBS DescriptionTemperature controllers
• NBS Noten/a
• NBS Object NameResideo - Temperature controllers
• NBS Office Master Tagn/a
• NBS Referencen/a
• Nominal Depth0 mm
• Nominal Height0 mm
• Nominal Length0 mm
• Offset36 mm
• Power Consumption1,6W (24 Vac) 1,8W (230 Vac)
• Power SupplyBattery
• Production Year2024
• Rated Pressure Head Between Bypass Circuit Inlets(With Q=660 L/h)20 kPa
• Rated Pressure Head Between Primary Fluid Inlets(With Q=800 L/h)20 kPa
• Referenced Standardn/a
• Replacement Costn/a
• Shapen/a
• Size390x230x110 (open frame E); 390x480x110 (open frame E1, E2, E3); 550x550x110 (closed frame)
• Spare Partsn/a
• Supply Voltage230Vac–50Hz / 24V–50Hz
• Threaded Connections1” G
• Type CommentsTemperature control and thermal energy metering modules
• Type NameDCH2-DA E
• URLwww.watts.eu/
• Warranty Descriptionn/a
• Warranty Duration Labor0
• Warranty Duration Parts0
• Warranty Duration UnitYear
• Warranty Guarantor Laborn/a
• Warranty Guarantor Partscontact@wattswater.com